Rotel Michi P5 Series 2 Preamplifier

About The Rotel Michi P5 Series 2 Preamplifier

If you're serious about music and want something that really delivers, the Michi P5 Series 2 Preamplifier is made for you. Designed with music lovers and audiophiles in mind, it packs in high-end tech to give you a truly impressive listening experience.

At the heart of it all are twin 8-channel ESS Sabre ES9028PRO DACs, custom-tuned and running in Mono mode. This means each channel benefits from 8 DACs working together to pull out all the fine detail and texture in your music. The result? A soundstage that feels incredibly wide and immersive.

Powering the system are two specially made, shielded toroidal transformers feeding 16 separate power supplies. Every important circuit is isolated, helping keep noise to a bare minimum and distortion ultra-low. Simply put, the P5 Series 2 sounds stunning - bringing every note to life with clarity and depth.

It connects easily to just about anything: RCA and XLR balanced inputs, MM and MC phono stages, Bluetooth with aptX™ HD, coaxial and optical digital, and even PC-USB for high-res audio up to PCM 32-bit/384kHz and Quad DSD (11.2MHz). Full MQA decoding is built in too.

And it looks the part. The P5 Series 2 features Michi’s signature minimalist design, built with top-tier craftsmanship that reflects its flagship status. A crisp, high-res display, intuitive front panel controls, a remote, and headphone output make everyday use a breeze. It also offers RS232 and Ethernet ports for easy integration with control systems.

In short, the Michi P5 Series 2 stays true to the Michi promise - delivering next-level audio performance for even the most discerning ears.

Our Review

The Rotel Michi P5 Series 2 Preamplifier is a real gem for serious music lovers who want every detail in their listening experience to be nothing short of extraordinary. With its twin 8-channel ESS Sabre DACs running in mono mode, it uses a powerhouse multi-DAC setup that squeezes every last nuance out of your music, laying it out on a beautifully wide and immersive soundstage. Its ultra-quiet operation comes courtesy of dual shielded toroidal transformers and 16 separate power supplies - so there's nothing but pure, clean sound. From vinyl to high-res digital, it handles just about every format and source you throw at it, all while looking sleek and minimalist on your rack. With intuitive controls, a crisp display, and seamless integration options, the P5 Series 2 doesn’t just sound high-end - it feels it too.

Main Features & Specifications

• Design: Reference Quality Fully Balanced Preamplifier and DAC
• ESS Sabre ES9028PRO 8-Channel DAC (32-bit, 768kHz) in stereo configuration
• Coaxial (3), Optical (3), and Analogue RCA (4) inputs
• PC-USB with DSD 4x decoding with MQA and MQA Studio support
• Bluetooth with aptX™ HD and AAC
• Moving Magnet and Moving Coil phono stage inputs
• Balanced XLR inputs and outputs
• Twin custom toroidal transformers
• High-res dimmable TFT front panel display
• IP and RS232 for full control system compatibility
• Michi remote control included
• Certified Roon Tested
• Analogue Inputs
  • 2 x Balanced XLR
  • 4 x Single Ended RCA
  • 1 x MM/MC Switchable Phono
• Analogue Outputs
  • 1 x Fixed Line RCA
  • 2 x Mono Subwoofer RCA
  • 2 x Single Ended RCA Pre Outs
  • 2 x Balanced XLR Pre Outs
• Digital Inputs
  • 3 x Optical
  • 3 x Coaxial
  • 1 x PC-USB B
• Digital Outputs
  • 1 x Optical
  • 1 x Coaxial
• Bluetooth with aptX™ HD and AAC
• Ethernet Network Port
• USB A Power Port
• RS232 Automation Port
• External Remote In 3.5mm
• 12V Trigger In/Out Connection 3.5mm
• 12V Trigger Out Connection 3.5mm
• Total Harmonic Distortion (THD) 20Hz–20kHz: <0.002%
• Frequency Response
  • Line Level Inputs: 10Hz - 100kHz (±0.3dB)
  • Digital Inputs: 20Hz - 20kHz (±0.3dB)
  • Phono Input: 20Hz - 20kHz (±0.3dB)
• S/N Ratio (IHF "A" Weighted)
  • Line Level Inputs: 116dB
  • Digital Inputs: 100dB
  • Phono Input: 80dB
• Intermodulation Distortion (60Hz:7kHz, 4:1): <0.002%
• Input Sensitivity
  • Line Level Inputs (RCA): 160mV
  • Line Level Inputs (XLR): 250mV
  • Phono Input (MM): 2.5mV
  • Phono Input (MC): 250uV
  • Digital Inputs: 0dBFs
• Input Impedance
  • Line Level Inputs (RCA): 47kΩ
  • Line Level Inputs (XLR): 100kΩ
  • Phono Input (MM): 47kΩ
  • Phono Input (MC): 100Ω
  • Digital Inputs: 75Ω
• Input Overload
  • Line Level Inputs (RCA): 12V
  • Line Level Inputs (XLR): 12V
  • Phono Input (MM): 199mV
  • Phono Input (MC): 22mV
• Output Level
  • Unbalanced (RCA): 1V
  • Balanced (XLR): 2V
• Output Impedance
  • Unbalanced (RCA): 470Ω
  • Balanced (XLR): 100Ω
• Channel Separation
  • Line Level Inputs: >85dB
  • Phono Input: >55dB
• Tone Controls: ±10dB at 100Hz / 10kHz
• Digital to Analogue Converter: Twin 8-channel high precision ESS Sabre ES9028PRO Digital to Analogue Converters specially adapted to Mono mode
• Coax/Optical Digital Input Signals: LPCM (Up to 24-bit/192kHz)
• PC-USB
• USB Audio Class 1 (up to 24-bit/96kHz)
• USB Audio Class 2 (up to 32-bit/384kHz) Driver Installation Required
• DSD and DoP Support
• MQA and MQA Studio Support
• Roon Tested
• Power Consumption: 40W
• Standby Power Consumption
  • Normal: <0.5W
  • Network Wakeup: <2W
• Removable Power Cable: Upgrade to a Premium Power Cable for better performance
• Included Accessories: Remote Control, Power Cable
• Finish: Black
• Dimensions (WxHxD): 485 x 150 x 452mm
• Weight: 22.9 kg
• Manufacturer’s Warranty: 5 Years

Note: Features & Specifications Subject To Change Without Notice. E&OE.