Our Work

Bowers & Wilkins Home Cinema In Wodonga

B&W's Signature 800 Series
Our client always wanted B&W 801 speakers. So we installed these in his home cinema, including all the matching Bowers & Wilkins 800 series centre, rears and subs. The 801s' like power, so we teamed them up with the Hegel H30 Power Amps. Positioned next to the front speakers.
Bass Central
We ran long XLR’s from the processor and used short speaker cables to ensure as little loss as possible. We upgraded the orignal subs and installed 2 x JL Gotham g213v2 Subwoofers (168KG each!!) the old B&W DB1 subs didnt go to waste but were put in the back conrers. This system cranks!
Vision & Acoustic Treatment
For the Vision, a Barco Balder Projector and a madVR extreme was installed. Our expert Tony O’Brian went out and calibrated the image. Full acoustic treatment was done, which really tied the room together and made a huge difference to the sound.

Klipsch Behind The Screen
A 7.2.4 Dolby Atmos System from Klipsch is powerful and immervise. The front speakers 18" subs are behind a 160” 2.35 perforated screen. 8 surround speakers are located in the walls and ceilings. Not shown is the acoustic treatment that was put on the brick wall and bass traps in the corners.
Cinema Seats
This 11 seat Cinema was completed in the basement, of this Toorak home. An Anthem AVM-70 Processor ensures the sound is as the director intended. Completed with an RTI control system. The home owners even added an extra couch at the front, who's bringing the popcorn?
Movie Nights Done Right
We used a cinema scope 2.35” screen with the Sony VPL-7000 laser projector. A MAD VR Envy MK2 makes sure the aspect ratio is correct no matter what the video format is.
There are no annoying black bars to see on the top of bottom of the screen.

Cinema Screen
We installed a 140” Acoustically Transparent Screen for this basement cinema. The front Klipsch LCR speakers (Left, Centre, Right) have been mounted in the wall behind the screen. The acoustic weave material of the screen allows sound to pass through it but still creates an excellent quality picture.
Epson Projector
The top-of-the-line Epson EH-LS12000B 4k Laser Projector was supplied in this Cinema. This projector is a 3-Chip LCD unit, produces a very bright 2700 Lumens image and has a 2,500,000:1 Contrast Ratio. (Contrast Ratio is the difference in brightness between the brightest white and darkest black.) A Strong Fine Adjust Ceiling Projector Bracket helped our Installers to quickly and accurately calibrate the image on the 140” Screen.
Surround Sound
A Denon 7.2 Channel AV Receiver sends audio to the system’s speakers. In addition to the Klipsch Front LCR speakers, Klipsch In-Ceiling Speakers have been utilized to provide Surround Sound and Dolby Atmos Sound in the ceiling. An SVS 12” Powered Subwoofer creates the low-end bass that is very important for a room consisting of In-Wall and In-Ceiling Speakers.

Full Cinema Room
This small room packs a punch, using 3 Paradigm Elite 7 In-Wall Speakers mounted behind a Screen Technics Micro Perforated 140 Inch screen. Matched with Paradigm Elite In-Wall and In-Ceiling effect speakers, delivering amazing performance that can be heard and not seen.
Acoustic Treatment
Acoustic wall treatments were provided by Vicoustic, these significantly reduce reflection sound and improve audio performance. The treatment created a smooth and detailed sound that alleviated listening fatigue. Acoustics is so often left out of the design in favour of more expenisve gear, but if some thought and budget are left for the acoustics even modest priced gear will sound amazing.
AV Gear
A Denon AVC-X4800 powers all the in wall speakers. Two Paradigm X-12 subs deliver tight powerful bass. One sub is not enough for most rooms and we highly recommend 2 or more for a powerfull experience in every seat.
Another highlight is the RTI control system 1 remote control makes operating the system easy for everyone.