IsoAcoustics Gaia III Neo Carpet Disks

IsoAcoustics Gaia III Neo Carpet Disks

Designed to maintain stable support on carpet, the solid stainless steel Carpet Disks work with Gaia III Neo Speaker Isolation Feet to provide improved performance on thicker pile carpet and carpet with under pads.

The carpet disks feature 15mm long spikes which provide a strong connection through the carpet to provide a solid foundation for the Gaia Neo isolators.

What type of carpet should the Carpet Disks be used for?

The carpet disks are recommended to provide best results when the Gaia Neo’s are used on thick carpet, or carpet with a thick under pad. The carpet disks are not required on thin carpet.

Do I have to use Carpet Disks?

The carpet disks are optional and are recommended to provide best results when the Gaia Neo’s are used on thicker carpets.

Are there any alternatives to using Carpet Disks?

Similar results can be achieved by using a small slab of granite or marble to provide the Gaia Neo’s a solid surface to connect to on top of the carpet.

Will Carpet Disks work on carpet that is very thick?

Most carpets will compress under the weight of your speaker to allow the spikes to reach the solid floor below, but the carpet disks will still provide support for the Gaia Neo’s even if the spikes do not contact the floor.

Can I move the speaker with the Carpet Disks installed?

We recommend removing the carpet disks before moving the speaker. Tilt the speaker to one side at a time while removing the carpet disks on each side. When moving your speaker, we recommend using the Floor Sliders supplied with your Gaia Neo’s to allow you to slide the speaker on the floor.

How to install Gaia Neo Carpet Disks

Tilt the speaker or subwoofer to raise the Gaia Neo’s above the ground, then position the carpet spikes underneath the Gaia Neo’s and lower the side back down. Repeat the process on the other side by tilting the other side of the speaker and position the Carpet Disks underneath the Gaia Neo’s before lowering the speaker back down.

You might need to raise and lower each side of the speaker again until the carpet spikes are positioned level on the ground and are properly aligned underneath the Gaia Neo isolators.

The carpet disks installation is the final step. The carpet disks should not be installed until after the Gaia Neo’s are installed and the speaker or subwoofer is in its final position.