10 Argent Place Ringwood VIC

AudioQuest Sydney RCA Cable (600mm)


Stereo Interconnect Cable

AudioQuest Sydney - Stereo Interconnecting Cable With RCA Connectors.

AudioQuest Sydney - Stereo Interconnecting Cable With RCA Connectors.

Solid Long-Grain Copper (LGC) Conductors Improve Performance. Cold-Welded, Gold-Plated Plugs.

Solderless - For Lower Distortion. Extra Silver Content Over Big Sur. Designed In USA.

Cable Length Selected: 600mm
Availability: Despatched In 1 - 2 days.
Delivery: Free Australia Wide Delivery

Your price $210

Save $25.00 (Normally $235)

"Questions? We're here to help you get it right" - Andrew
Call me (03) 9874 8233

Product Description

Audio Interconnects -
Make The Best Connection!

More than just an essential accessory, quality interconnects will transform a good system into a superb system. Upgrading from either the ‘freebie’ cables or to something better pays dividends if performance is important. Our advice? Better cables don’t have to cost a fortune, but don’t short-change yourself or your system, as the final listening experience is only as good as the weakest link. Buy a product that will both match your system and meet your expectations. Then you will be happy! For all components $100 to $100,000!

AudioQuest introduces a brand new range of audio interconnects which deliver a performance level and price that just a few years ago would have been simply impossible. The AudioQuest Sydney stereo RCA cable is terminated by a gold-plated male stereo RCA connectors on each end.


Did you know that the Sydney Harbour Bridge is the tallest and widest steel-arch bridge in the world, and the fifth longest. The Tyne River Bridge in Newcastle, England is smaller, but was we are told the design chosen to span Sydney harbour. The “Coathanger” (the bridge’s nickname in Sydney) is close to the Sydney Opera House for worldwide recognition as a symbol of Sydney, and as a symbol for all of Australia. An organized and rather expensive ‘Bridge Climb’ is offered many times a day to the top of the bridge, offering a truly exceptional view of Sydney’s amazing harbour from 134 metres (440 ft) above the water. However, we can say that even a walk across at street level for free is also amazing and will get you save you money for some new interconnects! Anyway, like all products from AudioQuest, the Sydney range of RCA cables are made to exacting standards and offer many of the design features of the more expensive models in the range. Lets take a look.

Solid Perfect-Surface Copper Conductors (PSC): Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way.

For over 30 years AudioQuest has pioneered the use of superior metals; yet even they were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Sydney's conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydneys very clean sound.

Polyethylene Air-Tube Insulation: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.

Carbon-Based 3-Layer Noise-Dissipation System (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.

Double-Balanced Asymmetrical Geometry: Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

Cold-Welded Gold-Plated Pure "Purple-Copper" RCA Plugs: This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers' plugs.

  • Design: Stereo cable with dual RCA connectors at each end
  • Conductors: Solid Perfect Surface Copper (PSC) conductors for excellent performance
  • Insulation: Polyethylene air-tube insulation for low distortion
  • Shield: Carbon 3-layer NDS (Noise Dissipation System) shields against RF interference
  • Geometry: Double-balanced asymmetrical cable geometry separates the ground and shield for quieter performance
  • Braid: Black braided jacket
  • Connectors: Cold-welded, gold-plated RCA plugs feature a solder-less design for lower distortion
  • Lengths Available: 600mm - 3 metres
  • Manufacturers Warranty: 5 years

Note: Features & Specifications Subject To Change Without Notice. E&OE

Additional Information

Additional Information

Name Stereo Interconnect Cable
Brand AudioQuest
Colour No
Cable Length 600mm
Shipping Weight (kg) 0.5001
Price Range $235


  No attachment found.
Get the AudioTrends newsletter