B&W FS700 S2 Speaker Stands

In Stock What's This?

Please Note: This item is in stock and ready for despatch. Please note that it may not be on demonstration or available for immediate in-store collection.

Priced from $899.00

Height 600mm, Steel/Aluminium/MDF Construction

Includes: Metal Floor Spikes & Cable Management System, Can Be Screwed To Matching B&W 700 S2 Speakers For Added Stability

Can Be Filled With Atacama Atabites For Increased Stability & Resonance Control

Need help? Call us on 03 9874 8233

Prefer email? Contact us via [email protected]

About The B&W FS700 S2 Speaker Stands

The B&W FS700 S2 speaker stands have been designed specifically for the B&W 700 S2 range of bookshelf/stand-mount speakers including the 705 S2, 706 S2 and 707 S2.

This elegant floor stand raises the speakers to the correct listening height and provides a stable, rigid support ensuring that you get the very best from your speakers. The heavy base ensures stability and the extruded aluminium columns may be filled with Atacama Atabites to add mass and damping.

B&W FS700 S2 Speaker Stands

Compatibility: The B&W FS-700 S2 speaker stand has been designed by Bowers & Wilkins to perfectly match their 700 Series bookshelf loudspeakers - including the 707 S2, 706 S2, and 705 S2 (all sold separately). The FS-700 S2 places the Bowers & Wilkins 700 Series speakers at the perfect height for optimum audio performance. The 700 Series bookshelf loudspeakers are secured to the stand using the included hardware and the threaded inserts under the loudspeaker. This speaker stand can also be used with other brands of bookshelf loudspeakers of similar size and weight (however, there is no hardware to secure other brands of speakers to the stand).

High-Quality Construction: The Bowers & Wilkins FS-700 S2 speaker stand uses aluminium, steel, and MDF construction. The top-plate is made of solid steel, while the bottom base is made of heavy-duty MDF. The upright post is made of aluminium and is hollow so you can add filler to it to make the stand even heavier. It comes in a black or silver finish.

Wire & Cable Management: The rubber or spike feet of the speaker stand raise it off the floor enough so you can route your speaker wire under the base and up through the hollow upright post to your mounted bookshelf loudspeaker.

Rubber & Spike Feet: The FS-700 S2 speaker stand includes rubber and spike feet. Use the rubber feet for hardwood, tile, vinyl, and laminate flooring. Use the spike feet for carpeted flooring. The rubber or spike feet screw into the bottom of the stand. The feet are adjustable, so you can level the speaker stand on uneven floors.

Note: Due to its corrosive properties, we do not recommend filling the columns with building or beach type sand.

Why Do You Need Speaker Stands?

That question is often quickly followed up with another: "Can't they just sit on the floor?" The truth is you can put the speakers wherever you like but the location and positioning absolutely and significantly affect performance. When bookshelf sized speakers are placed on the floor or against a wall their sonic output becomes 'connected' to the floor or walls. This results in sound that is muddy, distorted and lacking in clarity. Speaker stands elevate and isolate speakers from floors and walls. Sound is clearer and cleaner with much better imaging and a greater sense of realism.

Timber Floors? No problems! UK brand Atacama manufacture what we affectionately call 'spike shoes' that sit under each spike and thus eliminate damage to timber flooring. They can also be used on tile or stone floors. They are and optional extra accessory. Of course you can use the rubber 'buttons' that are included.

How To Make Stands Even Better: Where appropriate - like here with the B&W FS-700 S2 Stands - the post/tubes are hollow and can be 'filled' to further dampen vibrations & help minimise unwanted resonances and as a bonus extra, provide added stability. To make your stands sound better, Audio Trends recommend that you fill the stands with Atacama Atabites SMD-Z 7.5HD inert filler to achieve maximum sonic performance. Up to 10.4KG can be used per pair. Click here to read more about Atacama Atabites.

Main Features & Specifications

  • Design: Bookshelf/Compact Speaker Stand
  • Material: Steel/Aluminium/MDF construction
  • Floor Spikes: Included 
  • Rubber Feet: Included
  • Hardware: All screws and bolts are included
  • Top Plate: Can be screwed to matching B&W 700 S2 series speakers for added security
  • Dimensions (H x W x D): 601mm (24”) x 292mm (11.5”) x 298mm (11.7”)
  • Top Plate (W x D): 170 x 170mm approx
  • Finish: Black. Also available in Silver
  • Country Of Origin: United Kingdom

Note: Features & Specifications Subject To Change Without Notice. E&OE.

You May Also Be Interested In These Products
© 2004-2022 Audio Trends Pty Ltd. Prices, specifications, and images are subject to change without notice. We are not responsible for typographical or illustrative errors. Some of our web prices may be lower or differ from the price advertised in-store. This practise allows us to monitor our online marketing campaigns. So if needed, please remember to mention to our friendly staff that you've seen a lower price online.