The cheapest in-ceiling speaker we stock, but also extremely popular and not only because of the low price! Aaron also offer a guarantee of consistent build and sound quality reinforced with our two year warranty. These speakers have many features such as swinging arms for easy installation, aluminium mesh and a very flush appearance so they disappear into the mounting surface.

Aaron IW-120: Whether you need an in wall for humid environments, quality piped music, hidden surround speakers, high sound pressure level requirements or you just need a high fidelity sound source that doesn't intrude into your living space. We also offer you a guarantee of consistent build and sound quality reinforced with our two year warranty. These speakers have many features such as swinging arms for easy installation, aluminium mesh and a very flush appearance so they disappear into the mounting surface.

A special and rare feature is their Konex spiders which allows you to mount them on any axis without fear that the cone will sag after a period of time causing the speaker to vibrate. Add the fact that they are designed and manufactured by Aaron Loudspeakers using the very finest components must make it a product worthy of being included in your project.

Elan Elios E93C, E94C, E95C: Our three flagship in-ceiling models combine the finest in materials, our angled bridge design and a baffle that rotates a complete 360°, making installation and pin-point, high frequency steering incredibly simple and accurate. Quite simply, this is in-ceiling sound at its very, very best.

Elan Elios E91C, E92C: Home Theaters vary in magnitude and use. The requirements and expense of a surround sound system in the bedroom or playroom are not the same as a home’s main theater room.

Still, there’s no need to sacrifice sound and imaging just because you’re watching a movie in bed. The Elios E92C and E91C were designed to impress the ears and your budget.

Elan Elios E532W, E552W, E752W: Using a finely-tuned array of dual woofers, pivoting dome tweeters and custom crossover networks, Elios Cinema In-Walls produce beautiful imaging and sonic excellence across the entire frequency spectrum.

As front stage left, right, centre - or rear channel surround – all three models shine in any home theater application.

Elan Elios E650S: Voiced specifically as surround sound counterparts to Elios in-wall & in-ceiling speakers, the E650S in-wall dipole speaker provide amazing spatial enhancement to all of your rear/side channel surround sound material. And the E650S features a small footprint, yet bigger sound than other speakers in their class.

Elan Elios E73C, E74C, E75C : Designed for critical, frequently-used listening areas, these three in-ceiling models offer exceptional bass, beautiful vocal range response and some of the most accurate, natural-sounding highs you’ll ever hear.

What’s more, each delivers stereo imaging rivaling that of perfectly positioned cabinet speakers by placing both the tweeter and the woofer in a pivoting baffle design that allows you to direct the entire frequency spectrum toward the prime listening area.

Elan Elios E70C, E71C, E72C: For rooms where the finest sound is still a prerequisite, but the listening area is more fluid (i.e. the kitchen or rec room), these three Elios in-ceiling models feature a stationary woofer baffle and a pivoting 1” tweeter that allow high-frequencies to be directed into the listening area.

Elan Elios E72D, E73D : Dual voice coil speakers are designed to provide stereo sound and imaging in areas where only one speaker can be installed.

Elios Dual Voice Coil Speakers are designed to provide THE BEST stereo sound and imaging possible from a single speaker.

Elan Elios E71W, E72W : For applications where only in-wall speakers will do, Elios has two high-performance models with 7-inch woofers and pivoting 1-inch tweeters that deliver full, rich, accurate sound to even the largest of rooms.

For very, very serious in-wall sound, you must check out Niles top-of-the-line AT-8700 speakers! The letters AT stand for advanced technology and that is exactly what these 200mm (8 inch) 3-way speakers have utilised. The woofer is extremely rigid being made from a combination of titanium, aluminium and urethane thus allowing it to handle lots of bass down to an amazing 30Hz from amplifiers delivering up to 200 Watts – and there aren’t many of them in the shops!

Audio Trends was so impressed with the AT-8700s that we have installed them in a no-compromise high-end 7.1 system in our own showroom! They have not disappointed. The Niles AT Series product manual is 28 pages long, so we recommend that you first download the attached 3 page brochure to find out more about these top-notch speakers. Yes, with this level of excellence comes a higher price tag, but when compared with similarly performing box speakers, the price is competitive and the installation options are extensive

For very serious in-wall sound, check out Niles AT-8200 speakers! Part of the Advanced Technology Series, but at a lower price than the AT-8700s, the AT-8200s are supplied as a 200mm (8 inch) 3-way speaker system. One of the main differences is in the woofer which is made from a combination of aluminium and urethane (titanium is omitted). It can handle lots of bass down to an amazing 30Hz from amplifiers delivering up to 150 Watts – more than adequate for most applications.

Other notable features – too many to list here – include the fully pivotal tweeter housing which contains a 32mm (1.5 inch) hyperbolic dome mid-range and a 25mm (1 inch) hyperbolic dome tweeter. Amazing stuff! The Niles AT series product manual is 28 pages long, so we recommend that you first download the attached 3 page brochure to find out more about these top-notch speakers. The AT-8200s represent excellent value and can be used in a variety of applications.

The Niles DS 6.5 is a very high quality in-ceiling speaker that has been designed for serious home cinema applications and not just as rears in a 6.1 or 7.1 system! The DS series are also suitable for front mains and centre speakers – a full in-ceiling system. All component parts, woofer, tweeter and crossovers are built to the highest standard. The 162mm (6.5 inch) graphite reinforced polypropylene woofer is extremely rigid, thus delivering powerful bass and also reducing distortion. It also pivots up to 15° thus focusing the bass and mids directly into the listening area.

Other notable features of the 6.5s include butyl rubber woofer surrounds for exceptional durability and a pivoting 25mm (1 inch) tri-laminate Teteron dome tweeter with fluid-cooling for clear and detailed high-frequencies. Impedance is ‘switchable’ and can be either 4 or 8 Ohms. Frequency response is in the range of 50Hz to 22kHz and the recommended amplifier output can be up to 150 Watts. Very impressive!

The Niles DS 6.3 is a good quality in-ceiling speaker that has been designed for serious home cinema applications and not just as rears in a 6.1 or 7.1 system! The DS series are also suitable for front mains and centre speakers – a full in-ceiling system. All component parts, woofer, tweeter and crossovers are built to the highest standard. The 162mm (6.5 inch) polypropylene woofer is extremely rigid, thus delivering powerful bass and also reducing distortion. It also pivots up to 15° thus focusing the bass and mids directly into the listening area.

Other notable features of the 6.3s include butyl rubber woofer surrounds for exceptional durability and a pivoting 25mm (1 inch) silk dome tweeter with fluid-cooling for clear detailed high-frequencies. Impedance is ‘switchable’ and can be either 4 or 8 Ohms. Frequency response is in the range of 50Hz to 20kHz and the recommended amplifier output can be up to 100 Watts.

The Niles CM8HD is a good quality in-ceiling speaker that has been designed for use in either a home cinema – we suggest use as effects – or multi-room sound system. All component parts, woofer, tweeter and crossovers are built to high standards. The 200mm (8 inch) TCC polypropylene woofer is very rigid, thus delivering powerful bass and also reducing distortion.

Other notable features of the CM-8HDs include butyl rubber woofer surrounds for exceptional durability and a pivoting coaxial 25mm (1 inch) tri-laminate Teteron dome tweeter that pivots up to 20° and has fluid-cooling; all for clear and detailed high-frequencies. Impedance is ‘switchable’ and can be either 4 or 8 Ohms. Frequency response is in the range of 45Hz to 21kHz and the recommended amplifier output can be up to 150 Watts.

The Niles CM-6HD is a good quality in-ceiling speaker that has been designed for use in either a home cinema – we suggest use as effects – or multi-room sound system. All component parts, woofer, tweeter and crossovers are built to high standards. The 162mm (6.5 inch) TCC polypropylene woofer is very rigid, thus delivering powerful bass and also reducing distortion.

Other notable features of the CM-6HDs include butyl rubber woofer surrounds for exceptional durability and a pivoting coaxial 25mm (1 inch) tri-laminate Teteron dome tweeter that pivots up to 20° and has fluid-cooling; all for clear and detailed high-frequencies. Impedance is ‘switchable’ and can be either 4 or 8 Ohms. Frequency response is in the range of 50Hz to 21kHz and the recommended amplifier output can be up to 125 Watts.

The Niles HD-LCRis another of the highly regarded Niles HD or High Definition Series, the LCR basically means that they can be used as a left, centre or right in-wall speaker. They are particularly designed for use in home cinema systems where the custom or invisible look is the goal. All component parts, woofer, tweeter and crossovers are built to high standards. The dual 162mm (6.5 inch) TCC polypropylene woofers are very rigid, thus delivering powerful bass and also reducing distortion.

Other notable features of the HD-LCRs include butyl rubber woofer surrounds for exceptional durability and a 25mm (1 inch) Teteron dome tweeter that has fluid-cooling; all for clear and detailed high-frequencies. Impedance is 4 Ohms and frequency response is in the range of 65Hz to 21kHz. The recommended amplifier output can be up to 150 Watts.

The Niles CM-HD6fx is a high definition series, side/rear channel effects, ceiling mounted speaker system. It features a 172mm (6.5) injection-moulded TCC polypropylene woofer which is very rigid, thus delivering sufficient bass and also reducing distortion. Other notable features of the CM-HD6fxs include butyl rubber woofer surrounds for exceptional durability and dual 19mm (3/4 inch) Teteron dome tweeters that have fluid-cooling; all for clear and detailed high-frequencies. These fire to either side providing a uniform sound field that is ideal for special effects.

A baffle-mounted direct/diffuse switch creates realistic surround effects regardless of room placement or listening position and the baffle mounted treble cut switch enables precise high frequency tone matching in any room. Impedance is 8 Ohms and frequency response is in the range of 60Hz to 21kHz. The recommended amplifier output can be up to 125 Watts.

The Niles CM-8MP is a good multi-purpose in-ceiling speaker that has been designed for use in either a home cinema – we suggest use as effects – or multi-room sound system. All component parts, woofer, tweeter and crossovers are built to high standards. The 200mm (8 inch) TCC polypropylene woofer is light weight but strong and very well damped.

Other notable features of the CM-8MPs include treated foam woofer surrounds for durability and a pivoting coaxial 19mm (3/4 inch) tri-laminate Kaladex dome tweeter that pivots up to 20° and has fluid-cooling; all for clear and detailed high-frequencies. Impedance is 6 Ohms and the frequency response is in the range of 55Hz to 20kHz. The recommended amplifier output can be up to 100 Watts.

The Niles CM-6MP is a good multi-purpose in-ceiling speaker that has been designed for use in either a home cinema – we suggest use as effects – or multi-room sound system. All component parts, woofer, tweeter and crossovers are built to high standards. The 172mm (6.5 inch) TCC polypropylene woofer is light weight but strong and very well damped.

Other notable features of the CM-6MPs include treated foam woofer surrounds for durability and a pivoting coaxial 19mm (3/4 inch) tri-laminate Kaladex dome tweeter that pivots up to 20° and has fluid-cooling; all for clear and detailed high-frequencies. Impedance is 6 Ohms and the frequency response is in the range of 65Hz to 20kHz. The recommended amplifier output can be up to 75 Watts.

The Stealth Acoustics AX3 is a three-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame which attaches directly to standard structural framing without the need for special mounting brackets. The paintable active diaphragm face is a structurally modified three layer composite consisting of two layers of graphics grade paper with a foam core. The diaphragm is bonded to the frame, creating an active area surrounded by a stable mounting area. Basic installation instructions are shown on our removable cover sheet that comes off before taping and finishing begins. The face of the panel has been pre-primed and is ready to receive finishing materials. The edges of the panel are tapered similar to the edges of gypsum wallboard, providing the room necessary for normal wallboard tape and joint compound to be used to feather the speaker seamlessly into the wall or ceiling. The AX3 loudspeaker comes equipped to match either 1/2” or 5/8” wallboard installations. On-site finishing options include latex paint, covering with light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials.

Stealth Acoustics speaker invisibility allows for powerful advantages over other loudspeakers as they can be placed wherever they sound best, free of visual concerns that may conflict with architectural features. Stealth Acoustics offers complete, invisible companion subwoofer solutions for extended low frequency response.

The Stealth Acoustics FX8 is a full range in-wall speaker system that will not compete with the architectural elements of your living space. The audio performance of the FX8 is comparable to conventional in-wall speakers in the price range. The fact that it becomes completely invisible when installed is a bonus. Whether it's background music for your living room or a 5.1 surround sound system for your family room, the FX8 is up to the task. So go ahead, put speakers where ever you want sound. Experience the freedom of invisibility.

The Stealth FX8 is a two-way system, incorporating an acoustically coupled high quality, high-power 8" cone woofer and a directly coupled 25mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow for smooth frequency extension to 20kHz, even with four coats of paint. As with all Stealth speakers, the beefy crossover system is over provisioned to take abuse and is equipped with self-resetting poly switches to protect the drivers well below their rated power handling. To further ensure consistent quality, we test each Stealth speaker with computer analysis and a listening test before they are released for shipment.

Stealth Acoustics FX6 invisible flat-panel speaker system is our most cost-effective invisible speaker. Smaller and lighter than our FX8 or AX3 models, the FX6 has a non-fatiguing performance that challenges traditional visible 6”in-wall / ceiling speakers. As with all Stealth speakers, the FX6 becomes completely invisible when installed and finished in a sheetrock wall. The FX6’s smaller footprint (15-7/8" x 11-7/8" x 3”) allows for more versatile installation options in a standard 16" stud bay or in framing as narrow as 8-3/8". The FX6 has a mounting depth of 3", making it ideal for wall, ceiling or soffit installations. With high-frequency response extending to 20kHz, the FX6 has excellent sound quality at an affordable price, while still providing you with Stealth’s unique invisibility.

The Stealth Acoustics B1630 in-wall subwoofer panel is a unique solution for putting subwoofer powered low end into a living space invisibly. The B1630 is a panel 16" by 30" that mounts directly to the structural framing of the wall replacing the drywall. The panel has an active area that moves and is surrounded by a solid mounting frame. The subwoofer panel is secured to the mounting frame, and the drywall is bonded to the panel to create a seamless transition. Similar in construction to the Stealth 228 Series 2 full range system, the B1630 has a surface on the face of the panel that is designed to be painted with latex based products. Light texture or wallpaper can also be applied.

  The B1630 uses (2) 8" woofers mounted on a baffle built from 1" thick MDF. This acts as the backbone of the system. The baffle is bonded to one side of the mounting frame with the active panel mounted to the opposite side. This creates an air tight chamber. The woofers fire into this chamber activating the entire face of the panel with the exception of the 1-3/4" mounting border. The mounting area is identified by a dashed line printed on the face of the panel. The active panel is constructed of a three layer combination of materials consisting of two layers of a high quality paper separated by a layer of Styrofoam. This creates a panel that is very light weight yet rigid enough to maintain the integrity of the wall. When used in conjunction with 5/8" drywall, the B1630 can be installed in framing openings as narrow as 9-1/2" between studs or ceiling joists. Minimum depth is 3-1/2".

  Since it installs like a piece of wall board, finishing is left to the professional drywall tradesman. The A/V integrator need not pick up a trowel. The basic installation notes are printed on the face of every panel and a step by step photo installation guide is shipped with every pair of speakers.

Stealth 255R Subwoofer Amplifier is $999 Stealth 255R Brochure

The Subsonic CS200 are a high quality 200mm in-ceiling speaker made to the highest standards. Utilising audiophile quality crossover components, the CS200 will produce beautiful music either in a dedicated audio system or a multi-room system or background music. Delivering a smooth full range performance with quality reproduction across the full frequency bandwidth , they are the ideal speaker when you want something to be heard but not seen. Great for rear speakers in a home cinema system as well. At $499 they represent outstanding value for money.